Tyres are as important as the engine in a vehicle. From breaks and acceleration to absorbing any bumps in the road, it all depends on the tyre quality. Hence they are essential for a smooth driving experience. The quality of a tyre will depend on the pressure inside it, as tyres that are not inflated to the right pressure can cause various problems.
Nitrogen has long been used to inflate tyres instead of compressed air in aircraft and racing cars as it allows for better road holding and gripping functionality. So it goes without saying that using nitrogen tyre inflators to fill tyres is the superior choice and is more of a stable alternative to filling your tyres with air.
A nitrogen tyre inflator is made up of an air compressor and an adsorption filter that allows nitrogen and oxygen in the air to pass through. Nitrogen and oxygen separate out due to their different diffusion rates when the air passes through the adsorption filter. Nitrogen from the atmosphere is thus enriched from 78 percent to approximately 98 percent. The separated adsorption nitrogen and oxygen are stored separately in different receivers for tyre inflation.
Nitrogen tyre inflators benefit both commercial and passenger vehicles. They eliminate the need to check tyre pressure every couple of days, distribute wear and tear evenly, and keep the tyre in good condition for much longer.
Did the above points convince you to switch to nitrogen? If yes, then get nitrogen tyre inflators from tyre inflator manufacturers because the tyres deserve a longer, healthier life.
Aside from aircraft and racecars, due to its array of benefits, tyre inflator manufacturers have started catering to the general public making their life easier and their drives safer.
Nitrogen Tyre Inflator Range | |
---|---|
Nitrogen tank capacity | 60 to 150 Litre |
Outlet Pressure | 5 to 9 kg/cm2 |
Purity | 95% |
Operating Voltage | 220 – 230V |
Operating Temperature | 45 to 50 Deg cel. |
Model | Flow rate | Purity | Inlet pressure | Outlet pressure | Dew point | Operating Temp | Noise level |
---|---|---|---|---|---|---|---|
L/Min | % | Kg/cm2 | Kg/cm2 | °C | °C | db | |
BRISE-N-150 | 150 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-300 | 300 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-500 | 500 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-700 | 700 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-1000 | 1000 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-1200 | 1200 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |
BRISE-N-1500 | 1500 | >99.50 to 99.99 | 7 to 8 | 5 to 7 | -40 to -80 | 40 to 50 | <75 |